How To Make A Macrame Plant Hanger Longer

June 23, 2022 Post a Comment

Relying heavily on the repetition of a few simple knots to create a perfectly textured and colourful hanging plant holder. Gather all 8 pieces of cord, fold in half and loop through the ring.

LEARN THREE BASIC MACRAME KNOTS TO CREATE YOUR WALL

Macrame plant hanger diy tutorial.

How to make a macrame plant hanger longer. Also, if you want to make a longer version, but with 4 parts, you'd need to add 2 more ropes (12 each). Here’s how to do a square knot. Now separate the bundle of cords into four groups with four cords in each group.

Then take the first pair and loop them around each other to make a simple knot. How to start a macrame plant hanger using a square knot chain with ring. Like i said earlier, i like to either use a hanger hooked onto a door or a nail that is already in the wall.

With just learning the 3 basic knots, you’ll be able to create countless gorgeous macrame plant hangers. Before i finished off my macrame plant hanger i gathered the rope and tied it with a hairtie in order to mess around with the diameter of the basket. My simple macrame planter came out to be 2.5' long.

Hang your planter and position your flower pot in the macrame plant hanger. Fold the cords in half to find the centre at the top of your ring. Loop all eight pieces of your 12 foot cord through the ring so they fold in half at the center of the string.

Once the braid is done, untie the overhand knot made at the beginning. Gather all of the strands of twine together and make one big overhand knot midway between the last row of knots and the end of the strands. We have a huge selectionsof recycled cotton braided cord for you to choose from!

It’s also helpful to have a rolling rack, or something similar, to hang your project on while you work. When you have all your ropes together, find the middle and fold it, create a loop knot. I like working with a cotton cord as it is easier on the hands than the rougher hemp cord.

After cutting, stretch each shirt string to make it longer and round. To be doing this all you have to do is to take a piece of string that’s about 2 feet long and place the one end below the wooden ring, hold it there with your thumb and create a loop a couple of inches down and then take the longer side of the string and wrap it around all of the cords tightly. Check out this handy video to learn the lark’s head knot, square knot, spiral knot, and double half hitch knot!

If you want to make a longer one, you'd need a longer rope. The knots are easy enough to bring more and take out length from in order to adjust for the size of the pot chosen. How much does a diy macrame plant hanger cost?

Then, you have to make a gathering knot to join all of the cords. Then, tape the hanger or the top of the loop to the wall (or door) to keep the macrame still. Combine 2 strands from 1 series of knots with 2 strands from series of knots next to it and make a square knot, or series of several square knots.

How to create a macramé plant hanger: Cotton cord is commonly used for macramé, though many people also use twine, fabric or other rope with interesting textures. Trim the ends so they are even.

The next technique to start a macrame plant hanger is by using a square knot. Macrame is dead easy to do! Secure with tape to make.

First, we need to cut 6 ropes, 12 feet each. This isn’t necessary, but it’s helpful when making longer macramé projects. How to make a diy macrame plant hanger.

Adjusting for the pot of the macrame plant hanger. Using your 5 foot long piece of string, tie a loop knot right below the ring. At the longer end, group all cords into pairs.

To make the hanger you will need : For this macramé hanger, we used 21m of twine (7 x 2.5m for the structure of the hanger + 1 x 3.5m for the wrapping) measure out 7 pieces of string of 2.5m and measure the 8th piece of string longer, at 3.5m. Vary the cord or rope from rustic to neon to nylon to vary the style of the macrame plant hanger like from rustic to vintage to modern.

Take four strands and tie a square knot. Cut your remaining cord so that it’s all one length. You will first want to start off with 4 long cords or cords in multiples of 4.

Then, divide into groups, i used 3 shirt strings (which makes 6 strings), and 4 shirt strings (which makes 8 strings) for every planter. Take a ruler or tape measure and measure 18 in (46 cm) down from the top knot. What supplies do i need to make a macrame plant hanger?

Attach each pair of strands together 18 in (46 cm) from the top knot. Take 2 cords and make 8 half knots to bind all your cords together. Repeat 3 more times to create 4 sets of knots, always using 2 strands from 1.

Pull them through the ring and make sure that they’re even in length. Take your 8 pieces of macrame cord and thread them through your ring.

Large macrame plant hanger Long pot holder indoor Rope